Tilting Priority System
Tilting Priority Espagnolettes:
To reduce the friction of the fixed-action moving and fixed blades, there is mashing on the fixed blades.
Thanks to the restrictive mechanisms, extra security can be provided by opening only in the tipping position.
Use the one-piece eccentric locking pin to achieve theoretical seal pressure in practice.
In order to be able to adjust the seal pressure, there is ± 0.8, ie 1.6 mm in total adjustment on the locking pin.
Thanks to the plastic clip, espagnolette does not come back after placing on the channel, this can easily be screwed on.
Long-lasting use is targeted thanks to the steel hub gear with the espagnolette hub mechanisms.
Plastic centering pin is available for mounting on shipment and shredding.
There are 7.5, 15, 30 and 40 axis dimensions.
Click for technical data
Tilting Priority Espagnolettes
Corner Elements:
130 x 130 mm in size
Especially for the ease of assembly in automatic machines, it does not come back when it is attached to the espagnolette channel thanks to the zamak clip.
There are 4 leaf springs in the steel guide to ensure motion transmission.
There is a mushroom pin that can be used with both safe and standard provisions.
In order to be able to adjust the seal pressure, there is ± 0.8, ie 1.6 mm in total adjustment on the locking pin.
Caterpillar joints twisted without moving blades.
Click for technical data
Corner Element
High strength zinc alloy lock slots.
Thanks to the pointed pins and open-mouth slots, which apply pressure in sequence and gradually, the wing is pulled into the case when the arm is turned towards the locking direction.
To protect the caterpillar connection of espagnolette and reduce the friction of fixed and movable blades, there is mashing on the fixed blades.
When it is in transom position, there is wind safety to prevent impact due to wind.
Thanks to the plastic clip, espagnolette does not come back after being placed on the channel, so it can be easily screwed on.
To be durable on heavy wings, the hinge connector is made of 4 mm thick steel sheet.
Click for technical data
Tilting Priority Scissor
Rear Locking:
There are 4 leaf springs in the steel guide to ensure motion transmission.
One piece eccentric locking pin is used to obtain the theoretical seal pressure in practice.
In order to be able to adjust the seal pressure, there is ± 0.8, ie 1.6 mm in total adjustment on the locking pin.
Straight and mushroom pin options are available.
Especially for the ease of assembly in automatic machines, it does not come back when it is attached to the espagnolette channel thanks to the zamak clip.
Click for technical data
Rear Locking
130 mm in size
The caterpillar port is twisted without movable blades.
There is a wing seating claw to prevent the wing from sagging and to be positioned correctly vertically.
In order to be able to adjust the seal pressure, there is ± 0.8, ie 1.6 mm in total adjustment on the locking pin.
With specially attached fins, it is provided to take a position without the use of a holder.
There are 2 different models for short and long wings.
Click for technical data
Bottom Locking
Standard Provision:
3 different print amounts with 12,5, 13 and 13,5 axles
Zinc alloy body.
Possibility of 13 axle double hole version.
Click for technical data
Standard Provision
There are 2 types of opening to right and left.
Available in 9 and 13 mm options.
Steel body on plastic filling.
Click for technical data
Tilting Priority Bottom Tipping Provision
Safe Provision:
Opportunity to make both right and left opening with the same provision
9 and 13 mm options.
Steel body on plastic filling.
Click for technical data
Safe Provision
Opportunity to make both right and left opening with the same provision
9 and 13 mm options.
Steel body on plastic filling.
Click for technical data
Bottom Tipping Provision
Special high strength steel body.
Bushing that reduces friction.
Choice of 9 and 13 mm.
Click for technical data
Wings Top Hinge
Case Top Hinge:
Zinc alloy body.
Easy installation opportunity thanks to the upward-facing pin.
Click for technical data
Case Top Hinge
Wing Bottom Hinge:
Carrying capacity up to 130 kg thanks to embedded steel pins on the zamak cast body.
Vertical adjustment and print adjustment possibility.
Click for technical data
Wing Bottom Hinge
Case Bottom Hinge:
Load capacity up to 130 kg thanks to integrated steel pins on a high-strength special steel body.
Horizontal adjustment possibility.
Click for technical data
Case Bottom Hinge
Adjustable Bottom Hinge:
It is made of high strength special steel sheet.
It has zamak clips.
It has the possibility of adjustment in two axes.
Right and left opening options are available.
Adjustable Bottom Hinge
Adjustable Top Hinge:
Hinge connector is made of 4 mm thick steel material. In this way, it can carry wings up to 130 kg in weight.
Thanks to the plastic clip, espagnolette does not come back after being placed on the channel, so it can be easily screwed on.
The same hinge can be used regardless of the right-left and 9-13 mm difference.
Adjustable Top Hinge
Adjustable Middle Hinge:
There are versions with 3D and 2D settings according to the adjustment possibility.
It has zamak clips.
The case is used with the top hinge.
Click for technical data
Adjustable Middle Hinge
Additional Locking:
The extension piece can be shortened to 250 mm in length and 130 mm in length.
The possibility of shortening the 500 mm length by 250 mm is mandatory and has one locking pin.
Additional Locking
Extension Piece:
Additional locking provides extra pressure where necessary.
It is 710 mm long and has 1 locking pin. 250 mm can be shortened.
Extension Piece
Microventilation Provision:
High strength stainless steel movable part on zinc alloy body.
It can be used with any corner element with straight or mushroom pin.
Click for technical data
Microventilation Provision
Overturn Safety:
When the flap is open in the normal position, it prevents the arm from returning to the transom position. Provisioning is not required.
Click for technical data
Tipping Safety
When the wing is normally open, it prevents the arm from turning.
While closing the wing, it lifts the wing and puts it in the position it should be vertically.
Provision is Required.
Click for technical data
Wing Lift Tipping Safety
Cartridge Latches:
They are 130 mm tall.
They are used in double wing systems, passive wing.
They have the same technical features as the bottom locking.
Cartridge Latches
Crowbar Espagnolette:
There is a passive wing lever espagnolette, the arm of which is used with espagnolettes in the middle.
Optionally, the upper and lower cartridges can be used with sliders or corner elements.
Thanks to the plastic clip, espagnolette does not come back after being placed on the channel, so it can be easily screwed on.
The lever arm is covered with plastic.
To protect the caterpillar connection of espagnolette and reduce the friction of fixed and movable blades, there is mashing on the fixed blades.
Click for technical data